Sorcerer Flue & Chimney Cleaner 90g
Reduces Corrosion + Improves Combustion
Breaks down tar & creosote build up
Makes sweeping more effective
Suitable for use on all fires, boilers
or stoves that burn wood and multi - fuels
Sorcerer improves the efficiency of your fire by gradually reducing the hard coatings of tar and creosote
that builds up in the chimney flue thereby improving combustion by keeping them cleaner.
However regular sweeping and inspection is essential
Directions:
For peak effectiveness use on a LOW fire and with the ashpan empty.
With the fire lit but almost burnt out, using suitable tongs, carefully place the entire Sorcerer packet
in the centre of the fire
After the Sorcerer has caught fire, to accelerate the action, close the fire damper and close the
stove door and/or place a fireproof metal sheet across the fire opening
Let the fire burn out and dispose of cooled ash in the normal way
Use 2 sachets for larger fires or boilers over 65,000BTU or where chimney flue area is abnormally large and dirty
DO NOT USE ON GAS OR ELECTRIC FIRES
IMPORTANT: Sorcerer works by rising on the gases created when burning. Normal sweeping will not remove
or dislodge accumulated tar and creosote build up in the chimney flue. On contact with deposits in the chimney
flue Sorcerer reacts to produce granules that can be dislodged during normal operation and are also more easily
removed when sweeping. The loosened deposits can cause chimney flue blockage, especially if Sorcerer is used
excessively on a very dirty, poorly maintained system.
It is very important to get the chimney flue swept either just before or soon after you start to use Sorcerer to ensure
free flow of gases and fumes. If used on a regular maintenance basis, Sorcerer will reduce the need for sweeping.
Inspect regularly and get chimney flues swept if in doubt. If no improvement is detected, increase the dosing or
frequency.